FLUKE 100-1000V Multifunction Installation Tester w. Memory FLU1662

Fluke 1662 Multifunction Installation Tester delivers solid, basic installation testing features.

The Fluke 1662 installation tester gives you Fluke reliability and all the basic testing power you need for day-in, day-out installation testing. It tests to all local regulations and is easy and intuitive to use. Additional helpful features like the On/Off switchable auto-start for RCD and loop test, and self-test save time and give you more confidence in your results.

• Measures RCD switching time and tripping level (ramp test)
• Measures trip time and current for RCD type A & AC in one test
• Measures RCD variable current
• Provides automatic RCD test sequence
• Includes Z-max memory for loop tests to support easy evaluation of the highest loop test value
• Provides unique zero adapter for fast, reliable and accurate test lead and mains cord compensation
• Includes a phase sequence indicator
• Comes with hard carrying case, padded carrying and waist strap, and remote control probe and lead

A solid, reliable, basic installation tester

• Tests voltage and frequency
• Checks wiring polarity to detect broken N wires
• Measures insulation resistance and loop and line resistance
• Measures motor windings with continuity test
• Calculates prospective earth fault current (PEFC/IK) and prospective short-circuit current (PSC/IK)

Specifications:

AC voltage measurement:

• Range: 500 V
• Resolution: 0.1 V
• Accuracy 45 Hz ? 66 Hz: 0.8% + 3
• Input impedance: 360 k?
• Overload protection: 660 V rms

Continuity testing (RLO):

• Range (autoranging): 20 ? / 200 ? / 2000 ?
• Resolution: 0.01 ? / 0.1 ? / 1 ?
• Open Circuit Voltage: >4 V

Insulation resistance measurement (RISO):

• Accuracy of tTest voltage (at rated test current): +10%, -0%
• Test voltage:
  
  • 100 V
  • 250 V
  • 500 V
  • 1000 V
• Insulation resistance range:
  
  • 20 M? / 50 M?
  • 20 M? / 100 M?
  • 20 M? / 200 M?
  • 20 M? / 200 M? / 500 M?
  • 20 M? / 200 M? / 1000 M?
• Resolution:
  
  • 0.01 M? / 0.1 M?
  • 0.01 M? / 0.1 M?
  • 0.01 M? / 0.1 M?
  • 0.01 M? / 0.1 M? / 1 M?
  • 0.01 M? / 0.1 M? / 1 M?
• Test current:
  
  • 1 mA @ 50 k?
  • 1 mA @ 100 k?
  • 1 mA @ 250 k?
  • 1 mA @ 500 k?
  • 1 mA @ 1 M?

Loop and line impedance (ZI):

• Range: 10 ? / 0.001 ? / High current m? mode
• Resolution: 0.01 ? / 0.1 ? / 1 ?

Prospective earth fault current, PSC test:

• Range: 1000 A / 10 kA (50 kA)
• Resolution: 1 A / 0.1 kA
• Computation: Prospective earth fault current (PEFC) or Prospective short circuit current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively.

RCD testing, RCD types tested:

• RCD Type: A4, AC?, G?, S?
• Notes:
  
  • 1 Responds to AC
  • 2 General, no delay
  • 3 Time delay
  • 4 Responds to pulsed signal
  • 5 Responds to smooth DC signal

Tripping speed test (?T):

• Current settings?:
  • 10-30-100-300-500-1000 mA ? VAR
  • 10-30-100 mA
• Multiplier:
  • x ?, x 1
  • x 5
• Measurement range:
  • RCD Type G: 310 ms, 50 ms
  • RCD Type S: 510 ms, 160 ms
• Notes:
  • ?1000 mA type AC only
  • 700 mA maximum type A in VAR mode
  • VAR mode not available for type B.

RCD/FI-Tripping Current Measurement/Ramp Test (I?N):

• Current range: 30% to 110% of RCD rated current?
• Step size: 10% of I?N?
• Dwell time:
  
  • Type G - 300 ms/step
  • Type S - 500 ms/step
• Measurement accuracy: ?5%
• Specified trip current ranges (EN 61008-1):
  
  • 50% to 100% for Type AC
  • 35% to 140% for Type A (>10 mA)
  • 35% to 200% for Type A (?10 mA)
  • 50% to 200% for Type B
  • 25% for Type B
• Notes:
• ?30% to 150% for Type A I?N > 10 mA
• 30% to 210% for Type A I?N = 10 mA
• 20% to 210% for Type B

Phase Sequence Indication:

• Icon: icon phase sequence indicator Phase Sequence indicator is active.

General Specifications:

• Size (L x W x H): 10 x 25 x 12.5 cm
• Weight (incl. batteries): 1.3 Kg
• Battery size, quantity: Type AA, 6 ea.
• Sealing: IP-40
• Safety: Complies with EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA ?s82.02.01 2000 and CAN/CSA c22.2 No. 1010 2nd edition
• Overvoltage: CAT III / 500V; CAT IV 300V
• Performance: EN61557-1 to EN61557-7 Second Edition and EN61557-10 Second Edition

Includes:

• 6x AA (IEC LR6) cell batteries
• C1600 hard carrying case
• Zero adapter
• Heavy duty mains cord
• STD standard test lead set
• C1600 hard carrying case
• Padded carrying and waist strap
• Quick reference guide
• TP165X remote control probe and lead
• User's manual on CD-ROM