The all new BlueVenom SV135 ?Nano? is a small, really small,Multiprocesswelder designed for STICK and TIG (DC-LIFT-TIG) with some very special features and benefits added-in, in fact it?s a market leader!

The BlueVenom SV135 Nano also punches well above its weight and offers some big features you just won?t get in other machines this size or price range, such as STICK-Pulse and LIFT-TIG-Pulse.

Includes

• BlueVENOM SV135 Power Source
• 200A Work Clamp with 1.5m Lead
• TwistlockElectrode Holder with 1.5m lead
• Plastic Carry Case
• Carry Strap
• OperatingManual
• WEG0225 x 1 ? Welding Electrodes 2.5mm
• 646764 x 1 ? Magnetic Clamp
• 646755 x 1 Pair ? Welding Gloves Heavy Duty
• 646215 x 1 ? Chipping Hammer
• 646363 x 1 ? Wire Brush

Specifications

• Power Supply (Voltage): Single-Phase 230V/240V +/- 10%
• Supply Lead and Plug supplied: 10 Amp
• Minimum Single Phase Generator Recommendation: 8kVA (at 0.8 Power Factor) at Max Amps
• Amperage Range: 10 ? 135A(STICK & TIG)
• Pulse Frequency Range is 0.5 ? 100Hz
• Factory setting is 1Hz
• Pulses Per Second (P?S SEC) (Only available in TIG (GTAW) with Pulse Mode)
  
  • Press the Control Knob (Quick press) to cycle through the settings until reaching Pulses Per Second (It will highlight as shown on image below). Use the Control Knob to adjust to the desired level. Pulse Frequency Range is 0.5 ? 100Hz. Factory setting is 1Hz.

Why is STICK-PULSE so good:

1. Fantastic for filling gaps or completing 1-sided penetrationruns in Butt Welds, the pulse really controls the penetrationburn-through.
2. Vertical-Up welding becomes easier, with much greater control for filling the side-wall transition when weaving from side to side, this helps prevent undercut.
3. Overhead welding transforms into a pleasurable task, that provides welds that look better, are more mitered in shape and the Pulse-Arc helps prevent the welds dropping down. Safety is improved because the reduced spatter ends back up in the weld, meaning lessmetal falls downas hot spatter, which means less chances of the welding operator getting spatter burns.
4. Vertical down welds (butt and fillets welds) become easier to control as the pulsing helps freeze the slagso the weld metal stays clean with less slag inclusions forming.

Why is LIFT-TIG PULSE so good:

1. Is easy to use and set, with only 3 settings required, the Peak-Current you set/see on the LCD screen, then the Base-Current % and the Number of Pulses per second.
2. The slow pulse settings makes it easy for welding root runs in carbon steel pipe or other butt-welds.
3. The Fast Pulse frequency is great for welding thin gauge stainless and mild steels and helps to control the heat input to reduce distortion on thin section metals, like water troughs, urinals, sinks, tanks, pipes and food utensils.